B&B Electronics USR604 - Manual - Manual (Page 16)

Section 4 - Software Installation
Page 16 of 45 Document Number: USR60x-0812m
www.bb-elec.com/
www.bb-europe.com/
Un-Installing the Driver
To un-install the driver for the USR60x converter:
1. Open the Control Panel
2. Click System to open the System Properties dialog box.
3. Select the Hardware tab.
4. Click Device Manager to open the Device Manager dialog box.
5. Expand Ports (COM & LPT)
USB Isolated Serial Port should be listed as one of the COM ports.
6. Right-click the COM port listing for the converter (USB Isolated
Serial Port)
The following dialog box appears.
7. Click OK.
The Com port listing for the converter disappears.