B&B Electronics 856-19717--57 - Manual - Manual (Page 32)

29
The left side of the iView² screen will display the IMC Networks products on the
network. Click the connection for the IE-MiniFiberLinX-II to open its iView² screen.
The example shows a connection to a FiberLinX but this could vary depending on the
connection. When configuring the IE-MiniFiberLinX-II as a standalone unit, only the
IE-MiniFiberLinX-II will appear.
A navigation bar on the top of the screen displays the options for configuring the IE-
MiniFiberLinX-II connection.
These options include the following:
Host Displays the configuration screen for the Host connection.
Remote Displays the configuration screen for the Remote connection.
This will show the IE-MiniFiberLinX-II configuration information.
Information on this screen is provided on the following page.
NOTE
The Host and Remote buttons will not appear when configuring the IE-MiniFiberLinX-II alone. In
this setup, a Configuration button will appear with the same settings.
Bandwidth Displays the Bandwidth Limitation Settings.
Port Desc
Displays a screen for setting port descriptions. Each name should not
exceed 32 characters or include any spaces.
Tables Displays a screen showing network performance statistics.
Advanced Displays the IE-MiniFiberLinX-II advanced settings.
Agent Info Displays information about the SNMP Management software.
Refresh
Reloads the content of a window with the most current data.