B&B Electronics EIR610-3SFP-T - Manual - Manual (Page 87)

Manual Documentation Number: EIR610-3SFP-T_0708M 79
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
2. To remove the community string, select the community string and
click Remove . The default community string cannot be edited.
„ Agent Mode: Select the SNMP version that you want to use and click
Change
SNMP System Configuration interface
Trap Configuration
A trap manager is a management station that receives traps (the system
alerts generated by the switch). If the trap manager is not defined, traps will
not be issued. Create a trap manager by entering the IP address of the
station and a community string.
1. IP Address: Enter the IP address of the trap manager.
2. Community: Enter the community string.
3. Trap Version: Select the SNMP trap version type (v1 or v2c).
4. Click Add .
5. To remove the community string, select the community string and
click Remove . You cannot edit the name of the default community string.