B&B Electronics EIR610-3SFP-T - Manual - Manual (Page 16)

8
Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
LED Indicators
LED Status Meaning
PWR
Green The switch is on
Off No power available
PWR1
Green Power Source 1 available
Off Power Source 1 unavailable
PWR2
Green Power Source 2 available
Off Power Source 2 unavailable
Fault
Red Power failure or port failure
Off Normal Operation
R.M.
Green
The switch is the master of the X-Ring
group
Off
The switch is not a ring master in the
X-Ring group
LNK/ACT
(for P9, P10
SFP)
Green SFP port is linked
Blinks Networking is active
Off No device attached
P9, P10 (RJ-45)
Green
(Upper LED)
Network device detected
Blinking
(Upper LED)
Network is active
Off
(Upper LED)
No device detected
Green
(Lower LED)
The port is operating at speed of 1000M