B&B Electronics EIR610-3SFP-T - Manual - Manual (Page 75)

Manual Documentation Number: EIR610-3SFP-T_0708M 67
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
State Activity
After setting up the LACP aggregator, port state activity can be configured.
Mark the port and click Apply . The port state activity will change to Active
or Passive depending on its previous state.
„ Active: The port automatically sends LACP protocol packets.
„ Passive: The port responds only if it receives LACP protocol packets
from the opposite device.
Note 1. A link having either two active LACP ports or one active port can
perform dynamic LACP trunk.
2. A link, which has two passive LACP ports, will not perform dynamic
LACP trunk because both ports are waiting for an LACP protocol
packet from the opposite device.
Port Trunk – State Activity interface