Cobalt Digital FUSION 3G 9985 3G_HD_SD Loudness Processor - Manual (Page 44)

2
Installing a Rear Module
2-8 9985 PRODUCT MANUAL 9985-OM (V1.18)
RM20-9985-C Base Rear Module Provides the following connections:
• Four SDI video input BNCs ( SDI IN A thru SDI IN D )
• Two AES I/O BNC (AES-3id) input/outputs
( AES I/O 1 and AES I/O 2 ; I/O function of each
connection is software-configurable)
• Four SDI video output BNCs (SDI OUT A thru
SDI OUT D )
Note: AES inputs and outputs operational only with card
option +AES installed.
RM20-9985-D Base Rear Module Provides the following connections:
• Two SDI video input BNCs ( SDI IN A and SDI IN B )
• Four AES I/O BNC (AES-3id) input/outputs
( AES I/O 1 thru AES I/O 4 ; I/O function of each
connection is software-configurable)
• Two opto-isolated GPI inputs (terminals GPI 1-G
and GPI 2-G)
• Two SPST NO GPO relay closure contacts
(floating) (terminals 1/1 and 2/2)
• Two SDI video output BNCs ( SDI OUT A and
SDI OUT B )
Note: AES inputs and outputs operational only with card
option +AES installed.
Table 2-1 9985 Rear Modules — continued
9985 Rear Module Description