Cobalt Digital FUSION 3G 9985 3G_HD_SD Loudness Processor - Manual (Page 30)

1
Technical Specifications
1-26 9985 PRODUCT MANUAL 9985-OM (V1.18)
Audio and Video Formats Supported by the 9985
Table 1-3 lists and provides details regarding the audio and video formats
supported by the 9985.
Technical Specifications
Table 1-4 lists the technical specifications for the 9985 HD/SD Loudness
Processor with Frame Sync card.
Note: Input/output types and number of input/outputs in some cases are a function
of option(s) and/or rear module installed. Input/outputs requiring options are
specified below. Refer to Table 1-1, “9985 Video/Audio Signal Types” for
detailed information on available input/output complements and correspond-
ing options/rear module requirements.
Table 1-3 Supported Audio and Video Formats
Item Description/Specification
Input / Output Video Raster Structure: Frame Rate:
1080p 23.98; 24; 29.97; 25; 30
1080p 3G
(2)
50; 59.94; 60
1080i
(1)
25; 29.97; 30
720p 23.98; 24; 25; 29.97; 30; 50;
59.94; 60
486i
(1)
29.97
575i (1) 25
Embedded Audio The 9985 supports all four groups (16 channels) of embedded audio at
full 24-bit resolution in both SD (with extended data packets) and HD.
Analog Audio The 9985 supports 8 channels of balanced (differential) analog audio
(maximum total of inputs and outputs). The analog audio is encoded
such that a +24 dBu input is equivalent to digital 0 dBFS.
Discrete AES Audio The 9985 can accept 16 channels (8 pairs) of discrete AES audio on
75
Ω
BNC connections (maximum total of inputs and outputs). Sample
rate conversion can be employed to accommodate sample rate
differences in the AES stream and the input video stream.
(1) All rates displayed as frame rates; interlaced (“i”) field rates are two times the rate value shown.
(2) Not supported as analog video I/O formats. 3G SMPTE 425 only with option +3G.