Cobalt Digital FUSION 3G 9985 3G_HD_SD Loudness Processor - Manual (Page 116)

3
9985 Function Submenu List and Descriptions
3-64 9985 PRODUCT MANUAL 9985-OM (V1.18)
Figure 3-7 Audio Routing Example (Sheet 3 of 5)
Upmix 5.1-Ch
Loudness
Processing
Stereo
Loudness
Processing
B
Bus Ch 1
Bus Ch 2
Bus Ch 3
Bus Ch 4
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Main program audio (Emb Ch 1 - Ch 6, now on Bus Ch 1 -
Bus Ch 6) is fed to Upmixing, with the six bus channels routed
to upmixing inputs L thru Rs, respectively. With upmix Mode
set to Auto, these channels will pass unaffected if they contain
5.1 audio, or automatically be upmixed to 5.1 audio if they
don’t.
The auto/bypass upmixed main program audio (now
as channels Upmix L thru Upmix Rs) is then fed to the
5.1-channel inputs of the Loudness Processing
inputs.
The stereo SAP pair (now on channels Bus Ch 7 and
Ch 8) is routed to the L and R inputs of a stereo
loudness processor.
Output Audio
Routing/
Controls
Embed Ch 1
Embed Ch 2
Embed Ch 3
Embed Ch 4
Embed Ch 5
Embed Ch 6
Embed Ch 7
Embed Ch 8
C
LP51 L
LP51 R
LP51 C
LP51 LFE
LP51 Ls
LP51 Rs
LP2 L
LP2 R
The main program 5.1 audio (now conditionally upmixed and then loudness processed and now on channels LP51 L thru LP51 Rs),
and SAP stereo audio (now loudness processed and now on channels LP2 L thru LP2 R) are then routed from the card processing
to output embedded audio Ch 1 thru Ch 8 using the Output Audio Routing Controls – Emb Aud Out tab.
Upmix L –
Upmix Rs
Embedded outputs on
card SDI output