Cobalt Digital COMPASS 9284 3G_HD_SD-SDI 8X4 Video Routing Switch - Manual (Page 41)

9284-OM (V1.3) 9284 PRODUCT MANUAL 3-7
Operating Instructions
Checking 9284 Card Information
Checking 9284 Card Information
The operating status and software version the card can be checked using
DashBoard™. Figure 3-4 shows and describes the card information screen
using DashBoard™.
Note: Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-4. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-17) for corrective
action.
Figure 3-4 9284 Card Info Utility
The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card MFC-8320-N
(serial number ...8053) is hosting a 9284 card in slot 6.
Software Version Number
Refer to these numbers to check that documentation (such as
this manual) matches the card’s Software Release Number
and Software Build Number. Use these numbers also when
communicating to Cobalt
® regarding this card.
Board Status Display
Show the status of all card internal monitoring alarms.
9284_CARD_INFO.PNG
Power Consumption Display
This display shows the total power consumed by the
card for both the +12V and -7.5V rails.
Card State Product/Status Display
Product and Status tabs in Card Info pane show
Product Info (shown in example here) or detailed card
status when Status tab is selected (this tab is shown in
detail later in this chapter).