Cobalt Digital COMPASS 9284 3G_HD_SD-SDI 8X4 Video Routing Switch - Manual (Page 11)

9284-OM (V1.3) 9284 PRODUCT MANUAL 1-7
Introduction
9284 Functional Description
DashBoard™ User Control Interface
Figure 1-2 shows the DashBoard™ user control interface for the 9284.
Figure 1-2 9284 User Control Interface
Using DashBoard™, the 9284 and other cards installed in openGear®
1
compatible frames such as the Cobalt ® HPF-9000 or 8321 frame can be
controlled from a computer and monitor.
DashBoard™ allows users to view all frames on a network with control and
monitoring for all populated slots inside a frame. This simplifies the setup and
use of numerous modules in a large installation and offers the ability to
centralize monitoring. Cards define their controllable parameters to
DashBoard™, so the control interface is always up to date.
Computer
with NIC
20-Slot Frame with Network Controller Card
LAN
In conjunction with a frame equipped
with a Network Controller Card, 9284
card can be remotely controlled over
a LAN
DashBoard™ Remote Control
Using a computer with
DashBoard™ installed, 9284
card can be remotely controlled
over a LAN
Note: • To communicate with DashBoard™, the frame must have the Network Controller Card installed.
• DashBoard™ provides network control of the 9284 as shown. The value displayed at any time on
DashBoard™ is the actual value as set on the card, with the current value displayed being the
actual value as effected by the card.
1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.