Snap-On Motorized Loader - Manual (Page 26)

2-12
Functional Description and Specifications
Data Storage/Recall w/Date Time Stamp
3,000 measurements
Statistical Analysis
Max, Min, Range, Mean, Sigma N, Sigma, Cp, Cpk
%Error, -NoGo, +NoGo.
Histogram: Lower Set Limit, Upper Set Limit, 10 Divisions
Printer/Computer Serial Output Port
Serial Communications
RS-232 (true)
300—19.2K Baud
8 data bits
1 stop bit
no parity
Computer Serial COM Port
RS-232 (True)
300—19.2K Baud
NOTE
OPTIONAL: This port will communicate with the Motorized
Control Box at 19.2K Baud.
Analog Output
+(CW)/-(CCW) 1.8V at transducer full range linearity
±1% of reading
Loader Control Relays
Two, normally open, Form A, rated 12VDC @ 1/2A close
contact at 110% CW or CCW of torque/force transducer range.
For additional information refer to Transducer and
System specifications.
Display Capacity
(16 bit A/D), 8 digits, ±32,000 counts
Units of Measurement
Torque
ft lb, in lb, in oz, Nm, dNm, cNm, mkg and cmkg
Force
lbf, ozf, N, dN, kp, and gf
Angle
degrees
Torque/Force Resolution
Refer to transducer-indicator range and display resolution tables
in Functional Description of this chapter.
Angle Resolution
Bi-directional, X4 quadrature logic