Grain Systems Tanks PNEG-2400 - Manual (Page 69)

PNEG-2400 CFL Commercial Farm 4" Corrugation Externally Stiffened Grain Bin 69
5. Wind Ring Assembly Instructions
Wind Ring Assembly
Figure 5A
1. To connect wind ring pipe to the stiffeners, attach with 3/8" x 1" bolts through the flange of the
stiffener. Field drilling of wind ring locations may be required in some cases.
2. Attach wind ring pipe section to stiffener using two (2) 3/8" x 6" (S-7248) wind ring clamps.
3. Place pipes end to end without overlapping. Fasten together using two (2) wind ring couplers
and six (6) 3/8" x 1" flanged head bolts with flanged nuts. Couplers should be centered on the
seam of pipes.
Figure 5B