Grain Systems Tanks PNEG-2400 - Manual (Page 24)

3. Bin Assembly
24 PNEG-2400 CFL Commercial Farm 4" Corrugation Externally Stiffened Grain Bin
Notice for CFL 1 Ring Rectangular Door
This notice contains important information about the use of the CFL rectangular door manufactured for
4" corrugated tanks.
Important
This GSI CFL rectangular 1 ring door is designed for use in the 4" corrugation CFL series of tanks.
This door is intended for use with a tank specifically structured for the installation of the 1 ring door.
Special sidewall sheets are provided as part of the tank sidewall bundles. You must consult with GSI
concerning retrofitting into any existing GSI manufactured tank.
The door package NCWT0389 and NCWT0409 are designed for use in 16.5 m (54') - 23.5 m (60')
diameter tanks. See table
below for eave heights.
This door should not be installed in any GSI 2.66" corrugation series tank.
Consult with GSI concerning retrofitting into any existing GSI manufactured tank to determine compatibility
of the door package with the existing sidewall and stiffener configuration.
This door should not be installed in any tank not manufactured by GSI.
Part # Description Diameter Range Maximum Eave Height
NCWT0389
Triple Punched CFL 1 Ring Rectangular
Inner/Outer Door Frame Package 16.5 m (54') -
18.3 m (60')
23.5 m (77'-2")
NCWT0409
Double Punched CFL 1 Ring Rectangular
Inner/Outer Door Frame Package 16.5 m (54')
15 Ring
16.8 m (55'-2")
NCWT0409
Double Punched CFL 1 Ring Rectangular
Inner/Outer Door Frame Package 18.3 m (60')
12 Ring
13.5 m (44'-2")