Assembling outer door cover – Grain Systems Tanks PNEG-2400 User Manual
Page 47
3. Bin Assembly
PNEG-2400 CFL Commercial Farm 4" Corrugation Externally Stiffened Grain Bin
47
Assembling Outer Door Cover
The outer door cover allows access to the inner doors and acts as a weather barrier.
1. Locate door cover hinge brackets (NCWT0170) on the front of the outer door cover (NCWT0387D)
and the outer cover reinforcement channels (NCWT0388) on the back of the outer door cover.
NOTE: Only use two (2) bolts opposite of the hinge brackets when installing the outer cover
reinforcement channels to leave an opening for the door retaining brackets.
2. Simultaneously attach the door cover hinge brackets and the cover reinforcement channels to the
outer door cover using bolts (S-275) and nuts (S-396).
3. Attach door retaining brackets (WD-033) to the front of the outer door cover and the cover
reinforcement channels using bolts (S-277) and nuts (S-396).
4. Attach the latch plates (NCWT0166) to the outer cover seal angle (NCWT0373) using bolts
(S-275) and nuts (S-5220).
5. Ensure decals (DC-GBC-2A and DC-GBC-2S) are applied to outer door cover (NCWT0387D)
.