Grain Systems Tanks PNEG-2400 - Manual (Page 22)

3. Bin Assembly
22 PNEG-2400 CFL Commercial Farm 4" Corrugation Externally Stiffened Grain Bin
Bolting Requirements - 3 Stiffeners per Sidewall Sheet
• Use 3/8" x 1-1/2" (S-5060) bin bolts at splice locations to attach the stiffener/splice plate to
the sidewall.
• Use 3/8" x 1-1/2" (S-5060) bin bolts on laminated stiffeners to attach stiffeners to the sidewall sheet.
• Refer to Stiffener Assembly Details on Page 65 and the Caulking Detail on Pages 19 and 20 for
stiffener assembly hardware usage and caulking details. Refer to hardware identification section
on Page 50 for aid in hardware identification.
Figure 3H As Viewed from Outside
Sidewall Gauge Horizontal Seam Vertical Seam Stiffener to Sidewall Overlap Seam
20-15
5/16" x 3/4" (S-275)
[8]
5/16" x 3/4" (S-275)
[42]
3/8" x 1" (S-455)
[21]
5/16" x 3/4" (S-275)
[2]
14-12
3/8" x 1" (S-455)
[20]
3/8" x 1" (S-455)
[42]
3/8" x 1" (S-455)
[21]
3/8" x 1" (S-455)
[2]
11-10
3/8" x 1" (S-455)
[19]
3/8" x 1" (S-455)
[63]
3/8" x 1" (S-455)
[33]
3/8" x 1" (S-455)
[2]
9-8
3/8" x 1" (S-455)
[20]
3/8" x 1" (S-455)
[63]
3/8" x 1-1/2" (S-5060)
[33]
3/8" x 1-1/2" (S-5060)
[4]
6-5
3/8" x 1-1/2" (S-5060)
[20]
3/8" x 1-1/2" (S-5060)
[63]
3/8" x 1-1/2" (S-5060)
[33]
3/8" x 1-1/2" (S-5060)
[4]