Hardware, For a, Bin assembly – Grain Systems Tanks PNEG-2400 User Manual

Page 50

Text mode
Original mode

3. Bin Assembly

PNEG-2400 CFL Commercial Farm 4" Corrugation Externally Stiffened Grain Bin

Hardware

NOTE: All bolts should be tightened from the nut side. Refer to bolt Identification section

on Page 51

for

further information on identification of the bin hardware.

Bolt Size

Torque (Ft. Lbs.)

Minimum

Maximum

5/16"-18

3/8"-16

7/16"-14

1/2"-13

105

Grade 2 bolts are designated with a plain head.
NOTE: Grade 2 bolts are designated with a plain head.

Grade 5 bolts are designated by three (3) slash marks on the head.

Grade 8 bolts are designated by six (6) slash marks on the head.

Grade 8.2 bolts are designated by six (6) slash marks on the head in a
sunrise pattern.

CAUTION

Under no condition shall any other bolts be substituted for those supplied with
this bin.

Do not tighten bolts to exceed the torque specifications listed below.