Grain Systems Unload Augers PNEG-1049 - Manual (Page 4)

4 PNEG-1049 10"-12" Commercial Bin Sweep Augers
1. Introduction
General Information
1. We reserve the right to improve our product whenever possible and practical to do so. We reserve
the right to change, improve and modify products at any time without obligation to make changes,
improvements and modifications on equipment sold previously.
2. The commercial sweeps have been designed and manufactured to give years of dependable service.
The care and maintenance of this machine will affect the satisfaction and service obtained. By
observing the instructions and suggestions we have recommended, the owner should receive
competent service for many years. If additional information or assistance should be required, please
contact the local dealer.
Receiving Merchandise and Filing Claims
When receiving merchandise, it is important to check both the quantity of parts and their descriptions with
the packing list enclosed within each package. All claims for freight damage or shortage must be made by
the consignee within ten (10) days from the date of the occurrence of freight damage. The consignee
should accept the shipment after noting the damage or loss.
NOTE: The only way to prevent damage to the bin sweep, bin floor and wells is to completely remove the
bin sweep from the bin.
WARNING
DO NOT STORE SWEEPS IN THE BIN.
Sweeps are NOT designed to remain in a bin during filling, storage or gravity
unloading. A sweep left in a bin during these operations may be severely
damaged. The GSI Group will not be responsible for such damages.