Operation – Grain Systems Unload Augers PNEG-1049 User Manual
Page 37
6. Operation
PNEG-1049 10"-12" Commercial Bin Sweep Augers
37
33. Disconnect and lock out all power the bin sweep and unlock auger.
34. Disconnect the sweep auger wiring and remove the sweep from the bin. Disassemble the
sweep as necessary to remove it safety from the bin. See storage section for more details.
Figure 6M
NOTE: The only way to prevent damage to the bin sweep, bin floor and wells is to completely remove the
bin sweep from the bin.
DANGER
ALWAYS shut down, lock out and disconnect the power supply before adjusting,
servicing or cleaning the equipment.
DANGER
Keep out of the bin while the bin sweep is in operation. The bin sweep travels
rapidly around the bin. As the bin empties, the bin sweep travels around the
bin faster.
DANGER
Stay clear of the unload auger under the floor at the bin wells. The unload auger
could be exposed at these locations.
WARNING
DO NOT STORE SWEEPS IN THE BIN.
Sweeps are NOT designed to remain in a bin during filling, storage or gravity
unloading. A sweep left in a bin during these operations may be severely
damaged. The GSI Group will not be responsible for such damages.