Grain Systems Unload Augers PNEG-1049 - Manual (Page 18)

4. Assembly
18 PNEG-1049 10"-12" Commercial Bin Sweep Augers
8. Place the 2" O.D. x 11-1/2" connecting shaft into the free end of the flight. Once the holes are aligned
properly, attach the shaft to the flight using two (2) 5/8" x 4" grade 8 hex bolts and stover nuts.
(See Figure 4H.)
Figure 4H Connecting Shaft to Flight
9. Place the bearing stand assembly onto the connecting shaft. (See Figure 4I.)
Figure 4I Bearing on Connecting Shaft