Grain Systems Unload Augers PNEG-1049 - Manual (Page 21)

4. Assembly
PNEG-1049 10"-12" Commercial Bin Sweep Augers 21
16. Repeat Step 8 on Page 18 through Step 15 on Page 20 until all flight and shield sections
are assembled.
17. Join the segmented wheel bracket to the reduction wheel drive with two (2) 1/2" x 4-1/2" grade 5 bolts,
flat washers and nylock nuts. (See Figure 4N.)
Figure 4N Segmented Wheel Bracket to Reduction Wheel Drive
18. Join the mounting bracket and the segmented wheel bracket together with two (2) 3/8" x 1-1/2"
grade 8 hex bolts, two (2) flat washers and two (2) nylock nuts. (See Figure 4O.)
Figure 4O Segmented Wheel Bracket to Mounting Bracket