Grain Systems Unload Augers PNEG-1049 - Manual (Page 22)

4. Assembly
22 PNEG-1049 10"-12" Commercial Bin Sweep Augers
19. Attach the mounting bracket to the final back shield with two (2) 3/8" x 1-1/2" grade 8 hex bolts,
four (4) flat washers and two (2) nylock nuts. Attach the input shaft of the reduction wheel drive to
the final flight with two (2) 5/8" x 4" grade 8 bolts and stover nuts.
(See Figure 4P.)
Figure 4P Mounting Bracket Assembly to Shield
20. Attach the segmented wheel hub assembly to the reduction wheel drive with one 1/2" x 3-1/2"
grade 8 bolt and stover nut. (See Figure 4Q.)
Figure 4Q Hub Assembly to Reduction Wheel Drive