beautypg.com

Grain Systems Unload Augers PNEG-1049 User Manual

Page 24

background image

4. Assembly

24

PNEG-1049 10"-12" Commercial Bin Sweep Augers

25. Sandwich the front top and bottom motor clip onto the motor rods using two (2) 3/8" x 3" carriage

bolts and nylock nuts. Sandwich the back top and bottom motor clip onto the motor rods using
two (2) 3/8" x 3" carriage bolts and nylock nuts. DO NOT TIGHTEN the nuts at this time. They will
need adjustment when the motor is installed.

(See Figure 4S.)

Figure 4S Motor Clips to Motor Rod

26. Attach the electrical cord support stand to the top motor clips using two (2) 7/16" x 1-1/4" hex bolts,

four (4) flat washers and two (2) nylock nuts.

(See Figure 4T.)

Figure 4T Electrical Stand to Clip

See also other documents in the category Grain Systems Equipment: