Assembly – Grain Systems PNEG-1510 User Manual
Page 70
9. Assembly
70
PNEG-1510 Top Dry 24', 30' and 36' Manual Batch
Cross Over Platform Assembly (for use with stairs) (TDP-5013)
Before assembly of any platform, read the entire instructions to assure proper placement and assembly.
Refer to
for proper location of cross over platform. Begin by assembling the cross over platform
support frame using 5/16" x 3/4" truss head bolts and nuts. When attaching platform vertical support to bin
sidewall field drill sixteen (16) 3/8" diameter holes for each support spaced every 4". Be sure and use
5/16" x 3/4" bin bolt on vertical support to sidewall. Special attention should be taken when assembling
the platform support that the support brace is placed correctly.
Now proceed to the platform floor. Align holes on platform floor with holes on platform support and bolt
together using 5/16" x 3/4" truss head bolts and nuts. Next, assemble handrail posts, handrails and
handrail braces.
Figure 9U
Ref #
Part #
Description
Qty
Weight
1
LS-371
Platform Vertical Angle
2
7.59
2
TDP-5001
Handrail 27"
2
4.63
3
TDP-5003
Handrail Brace 36-29/32"
2
6.34
4
TDP-5004
Short Floor Brace 26-1/2"
3
11.85
5
TDP-5006
Platform Floor 37-7/8"
1
19.11
6
TDP-5007
Support Brace 50-21/32"
2
15.08
7
TDP-5008
Sidewall Brace 58"
2
19.65
8
TDP-5009
Platform Support 43-1/2"
2
12.95
N/S
TDP-5015
Cross Over Platform Hardware Package
1
3.95