VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard - Manual (Page 83)

FF desciptor Description Unit
FALSE_SIGNAL_CMD_STA-
TE Busy, last command, errorcode
FALSE_SIGNAL_CMD_CON-
FIGURATION
1
Amplitude safety of the 0 % curve, safety of the false signal
suppression, position of the 0 % and 100 % curve in near and
far range
FALSE_SIGNAL_CMD_CON-
FIGURATION
2
Gradient of the manual sectors, safety at the end of false echo
memory and depending on the import range gating out the false
signals
ECP_CURVE_AVARAGING_-
CONFIG Averaging factor on increasing and decreasing amplitude
LEVEL_ECHO_MEASURE-
MENT Function measured value filter
ECHO_CURVE_STATUS
PACKET_COUNT
GU_ID_END
ECHO_CURVE_READ Echo curve data
ECHO_EVALUATOR Echo parameters, first large echo, amplitude threshold first
large echo
ECHO_DECIDER Echo selection criteria, fault signal on loss of echo, delay on
fault signal on loss of echo
DISPLAY_SETTINGS Indication value, menu language, lightning
SIL_MODE
EDENVELOPE_CURVE_FIL-
TER Parameters of envelope curve filter, activation of smooth raw
value curve
EDDETECTION_CURVE_FIL-
TER Parameters of the detection filter, offset threshold value curve
EDECHO_COMBINATION Parameters for echo combination, function combine echoes,
amplitude difference of combined echoes, position difference of
combined echoes
LIN_TABLE_A…LIN_TABLE_-
Q 32 couples of percentage and lin. percentage values
ELECTRONICS_INFORMATI-
ON Electronics version
APPLICATION_CONFIG_-
SERVICE Limitation measuring range begin, safety of measuring range
end
LEVEL_ECHO_INFO Level echo ID, amplitude, measurement safety
DEVICE_STATUS Device status
FALSE_SIGNAL_LIMITS False signal distance min./max.
USER_PEAK_ELEC_TEMP Min.-/max.- values of electronics temperature, date
VEGAPULS 61 • Approval according to LPR radio standard 83
11 Supplement
41716
-EN
-120301