VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard - Manual (Page 48)

Menu section Menu item Default value
Setup Measurement
loop name Sensor
Medium Liquid/Water
Bulk solids/Crushed stones, gravel
Application Storage tank
Silo
Vessel form Vessel bottom, dished boiler end
Vessel top, dished boiler end
Vesell height/
Measuring range Recommended measuring range, see
"
Technical data " in the supplement
Min. adjustment Recommended measuring range, see
"
Technical data " in the supplement
Damping 0.0 s
Display Language Like order
Displayed value Distance
Display unit m(d)
Scaling 0.00 %, 0 l
100.00 %, 100 l
Further settings Distance unit m
Temperature unit °C
Unit SV2 m
Probe length Length of the standpipe Ex factory
Linearisation cur-
ve Linear
6 .4 Saving the parameter adjustment data
We recommended noting the adjusted data, e.g. in this operating
instructions manual, and archiving them afterwards. They are thus
available for multiple use or service purposes.
If the instrument is equipped with an indicating and adjustment
module, the data in the sensor can be saved in the indicating and
adjustment module. The procedure is described in the operating
instructions manual "Indicating and adjustment module" in the menu
item "Copy sensor data". The data remain there permanently even if
the sensor power supply fails.
48 VEGAPULS 61 • Approval according to LPR radio standard
6 Set up with the indicating and adjustment module
41716
-EN
-120301