VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard - Manual (Page 65)

11 Supplement
11 .1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts with encapsulated antenna system
-
Process fitting PVDF, 316L
-
Process seal FKM (IDG FKM 13-75)
-
Antenna PVDF
Materials, wetted parts with plastic horn antenna
-
Adapter flange PP
-
Seal, adapter flange FKM (COG VI500), EPDM (COG AP310)
-
Antenna PBT-GF 30
-
Focussing lense PP
Materials, non-wetted parts
-
Compression flange PP
-
Mounting strap 316L
-
Fixing screws, mounting strap 316L
-
Fixing screws, adapter flange 304
-
Plastic housing plastic PBT (Polyester)
-
Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated -
basis: Polyester
-
Stainless steel housing 316L
-
Seal between housing and housing
cover NBR (stainless steel housing, precision casting),
silicone (aluminium/plastic housing; stainless steel
housng, electropolished)
-
Inspection window in housing cover
(optional) Polycarbonate
-
Ground terminal 316L
Process fittings
-
Pipe thread, cylindrical (ISO 228 T1) G 1½ A
-
American pipe thread, tapered 1½ NPT
-
Flanges DIN from DN 80, ANSI from 3", JIS from DN 100
10K
-
Hygienic fittings Clamp, bolting according to DIN 11851, Tuchen-
hagen Varivent
Weight depending on process fitting and
housing material 0.7 … 3.4 kg (1.543 … 7.496 lbs)
Max. torque, mounting screws - strap on the
sensor housing 4 Nm
Max. torque flange screws
VEGAPULS 61 • Approval according to LPR radio standard 65
11 Supplement
41716
-EN
-120301