VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard - Manual (Page 36)

6 .3 Parameter adjustment
Through the parameter adjustment the instrument is adapted to the
application conditions. The parameter adjustment is carried out via an
adjustment menu.
The main menu is divided into five sections with the following
functions:
Setup: Settings, for example, for medium, application, vessel,
adjustment, damping
Display: Language setting, settings for the measured value indication
as well as lighting
Diagnosis: Information, e.g. on the instrument status, pointer,
reliability, simulation, echo curve
Further settings: e.g. instrument units, unit SV 2, false signal
suppression, linearization, date/time, reset, copy sensor data
Info: Instrument name, hardware and software version, calibration
date, device ID, instrument features
In the main menu point "Setup", the individual submenu points should
be selected subsequently and provided with the correct parameters to
ensure the optimum adjustment of the measurement. The procedure is
described in the following.
Each medium has different reflection properties. With liquids, further
interfering factors are fluctuation product surface and foam generation.
With bulk solids, these are dust generation, material cone and
additional echoes from the vessel wall.
To adapt the sensor to these different measuring conditions, the
selection "Liquid" or "Bulk solid" should be made in this menu item.
Through this selection, the sensor is adapted perfectly to the product
and measurement reliability, particularly in products with poor
reflective properties, is considerably increased.
Main menu
Setup/Medium
36 VEGAPULS 61 • Approval according to LPR radio standard
6 Set up with the indicating and adjustment module
41716
-EN
-120301