VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard - Manual (Page 82)

FF desciptor Description Unit
SECONDARY_VALUE_2_-
TYPE Secondary value 2 type
FILL_HEIGHT_VALUE_Type Filling height value type
DIAGNOSIS AITB Diagnosis
DIAG_MASK_1
DIAG_OUT_1
DIAG_MASK_2
DIAG_OUT_2
DEVICE_IDENTIFICATION Manufacturer ID, device type, bus type ID, measurement
principle, serial number, DTM ID, device revision
DEVICE_NAME Device name
IS-SPARE_ELECTRONICS Device name
DEVICE_VERSION_INFO Hard- and software version for system, function and error
CALIBRATION_DATE Day, month and year
FIRMWARE_VERSION_ASCII Software version
HW_VERSION_ASCII Hardware version
ADJUSTMENT_DATA Min./max.-adjustment physical, percent and offset
FIRMWARE_VERSION_MAIN Firmware versions major, minor, revision and build
PHYSICAL_VALUES Distance, distance unit, distance status, level and status
DEVICE_UNITS Distance and temperature units of the instrument
APPLICATION_CONFIG Medium type, media, application type, vessel bottom, vessel
height
LINEARIZATION_TYPE_SEL Type of linearization
SIMULATION_PHYSCAL
INTEGRATION_DATA Physical offset and integration time
DEVICE_CONFIG_PULS_RA-
DAR Electronics variant, probe type, max. measuring range, antenna
extension length, adjustment propagation antenna extension
lprapproval configuration
ADJUSTMENT_LIMITS_MIN Min. range min.-/max.- values physical, percent, offset
ADJUSTMENT_LIMITS_MAX Max. range min.-/max.- values physical, percent, offset %
FALSE_SIGNAL_COMMAND %
FALSE_SIGNAL_CMD_C-
REATE_EXTEND
FALSE_SIGNAL_CMD_DE-
LET_REGION
82 VEGAPULS 61 • Approval according to LPR radio standard
11 Supplement
41716
-EN
-120301