VEGA VEGASCAN 850 - Manual (Page 66)

66 VEGASCAN 850
Setup - Adjustment with the PC
• Choose the serial number of the sensor to
be assigned and confirm with "
OK“.
In the menu window "
Create new measure-
ment loop - Sensor configuration“, the VBUS
number and the serial number of the sensor
are displayed instead of "not configured“.
• Now click in the menu window " -Create new
measurement loop - Sensor configuration“
to "
Continue“.
• Click in the menu window " Create new
measurement loop - Measurement loop
designation“ to "
Level“.
The menu window " Create new measurement
loop - Measurement loop designation“ opens.
Enter here the measurement loop number
and a measurement loop description.
• Assign here also one or several PC/DCS
addresses to the actual sensor by clicking
to "
PC/DCS address“.