VEGA VEGAMET 614V - Manual (Page 36)

36 VEGAMET 614V
MET indication/PC/DCS outputs/DIS outputs
Settings in the „Extended menu“
MET indication/Unit:
In the menu item „prop. to“, you choose the
parameter to which the VEGAMET display
reacts (if you have carried out a scaling un-
der the menu item „Signal conditioning“,
„prop. to scaled“ will have been automatically
set, i.e. the display will indicate the scaled
value). „Prop. to volume“ is then useful if you
have selected, for example, a spherical tank
or a user-programmable lin. curve under
„Signal conditioning - Linearisation curves“.
The indicated values of the VEGAMET dis-
play then react proportionally to the volume of
the tank contents.
PC/DCS outputs and DIS outputs:
Are adjusted according to the same proce-
dure as the MET indication.
Param.
TAG-
No. 2
like TAG-No. 1
Param.
TAG-
No. 1
Adjust-
ment Signal
condi-
tioning Out-
puts
Cur-
rent
out-
puts Volt
out-
puts MET
display PC/
DCS
outputs DIS
outputs
DIS
output
1
DCS
output 1
Unit
0,0%
DIS
output 7
DCS
output
7
prop.
to
Per-
cent
Unit
0,0%
prop.
to
Per-
cent
Unit
0,0%
like DIS output 1
like DCS output 1
TAG -
No. 1
%
xx,x
prop.
to
Per-
cent
Relay
out-
puts
scaled
Height
…
scaled
Height
…
scaled
Height
…