VEGA VEGAMET 614V - Manual (Page 21)

VEGAMET 614V 21
Settings in the „Reduced menu“
6.4 Adjustment without medium
For this adjustment procedure, you have to
enter two values (pressure or distance) cor-
responding to the levels 0 % and 100 %.
Adjustment example
You know that your vessel is actually
filled up to 80%. Move to the menu
item „Max. adjust at % 100.0“. Push
the [–] key briefly, so that the figure
100.0 flashes (editing mode).
Continue pushing [–] until the figure
80.0 appears on the display. Now
push [OK] to save the adjustment.
Later, when your filling is, for exam-
ple, 10 %, you move to the menu item
„Min. adjust at % 0.0“. Briefly push
[+], until the figure 0.0 flashes
(editing mode).
Continue pushing [+] until „10“ ap-
pears on the display. Now push [OK]
to save the adjustment.
You can, of course, carry out the adjustment
with medium at 0 % and 100 % filling. Note:
The figures 0 % and 100 % must flash (edit-
ing mode), before they can be saved with the
[OK] key.
Max-
adjust
at %
100,0
Max-
adjust
at %
80,0
Min-
adjust
at %
0,0
Min-
adjust
at %
10,0
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment
with
medium without
medium
0%
at
bar
0,000
100%
at
bar
1,000
Meas.
value
indication
Adjust-
ment
bar
m