VEGA VEGASON 71 - 1 … 75 - 1 - Manual (Page 35)

Supplementary programmings
71 - 1 … 75 - 1 35
Signal processing MODE 0 - 93
The parameter adjustment of mode 0 - 93 defines
the condition of
-
the relay outputs and
- the current outputs in case of failure.
Programming possibilities
Mode 0 - 93 relay output / LED current output
1 no change actual current is stored
2 operated current - 0 mA
3 relays / current acc. to 0 %
4 de-energized current acc. to 100 %
Programming example
Changeover of the signal processing
relating to channel 1 (input of figure 4) .....................
• select mode 0 - 93 in MODEFIELD
• program figure 4 in PARAMETER FIELD
• then store with STO-button
Note:
When adjusting the signal processing note the table of
error codes on page 51.