Veris Industries H704-42_1(H)(E) Install - Manual (Page 8)

6%2)3 H704
INSTALLATION GUIDE
Z202366-0M page 8 ©2008 Veris Industries USA 800.354.8556 or 503.598.4564 / [email protected] 02081
Changing the Fuse
1. Disconnect and lock out power to panel.
2. Disconnect and lock out 120V Control (Mains) Power Source to Data Acquisition
Board.
3. Remove old fuse.
4. Replace with new fuse, Littelfuse 218 series or equivalent.
5. Reconnect 120V to Data Acquisition Board.
6. Reconnect power to panel.
7. Check “Alive” LED for proper function (See Product Diagram section for location).
service
accessories
CBL008 — Cable, Ribbon, 18 in (457 mm), BCM
CBL016 — Cable, Ribbon, 48 in (1219 mm), BCM
CBL017 — Cable, Ribbon, 60 in (1524 mm), BCM
CBL018 — Cable, Ribbon, 72 in (1829 mm), BCM
CBL019 — Cable, Ribbon, 97 in (2464 mm), BCM
CBL020 — Cable, Ribbon, 120 in (3048 mm), BCM
CBL021 — Cable, Ribbon, 240 in (6096 mm), BCM