Veris Industries AE011 Install User Manual
Notice, Danger, Installation guide
Z206026-0A
PAGE 1
©2011 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
05113
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
POWER MONITORING
INSTALLATION GUIDE
AE010/AE011
DIMENSIONS (AE010)
Enclosure for E5x Series Energy Meters with
Optional Locking Mechanism
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Follow safe electrical work practices.
See NFPA 70E in the USA, or applicable local codes.
• This equipment must only be installed and serviced by qualified electrical personnel.
• Read, understand and follow the instructions before installing this product.
• Turn off all power supplying equipment before working on or inside the equipment.
• Use a properly rated voltage sensing device to confirm power is off.
DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION
Failure to follow these instructions will result in death or serious injury.
DANGER
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• The installer is responsible for conformance to all applicable codes.
AE010/AE011
Pictured with meter and locking assembly installed;
E5x meter, AE010 enclosure, and AE011 locking assembly
must all be ordered separately.
7.2”
(182 mm)
7.1”
(180 mm)
5.7”
(144 mm)
1.8”
(46 mm)
4.9”
(123 mm)
4.4”
(110 mm)
2.5”
(62 mm)
1.8”
(45 mm)
1.9”
(47 mm)
1.4”
(35 mm)
RoHS
Compliant
OPERATION
The AE010 enclosure offers a mounting option for E5x Series energy meters that
helps protect from tampering and the elements. The enclosure is equipped with DIN
rail mounting hardware for easy installation and a NEMA 4X rating for durability.
The optional AE011 keylock provides additional security from unwanted tampering
(AE010 and AE011 are sold as separate units).
Front
Side, Cross Section