Veris Industries H8186-CB Install - Manual (Page 7)

Z204062-0F PAGE 7 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 02122
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
H8186-CB INSTALLATIoN GUIDe
bacnet descriPtions
BACnet Object Description Description Field Units
Device Object This device Veris H81xx Energy Meter
with H8186-CB BACnet
Communications Board
N/A
Analog Value Object 1 Accumulated Energy kWh_Total kWh
Analog Value Object 2 Device Instance Device_Instance N/A
Analog Input Object 1 Total Real Power kW_Total kW
Analog Input Object 2 Total Reactive Power kVAR_Total kW
Analog Input Object 3 Total Apparent Power kVA_Total kW
Analog Input Object 4 Total Power Factor PF_Total Unitless
Analog Input Object 5 Average Line-Line Voltage Volts_LL_Avg Volts
Analog Input Object 6 Average Line-Nuetral Voltage Volts_LN_Avg Volts
Analog Input Object 7 Average Current Current_Avg Amps
Analog Input Object 8 Real Power: Phase A kW_A kW
Analog Input Object 9 Real Power: Phase B kW_B kW
Analog Input Object 10 Real Power: Phase C kW_C kW
Analog Input Object 11 Power Factor: Phase A PF_A Unitless
Analog Input Object 12 Power Factor: Phase B PF_B Unitless
Analog Input Object 13 Power Factor: Phase C PF_C Unitless
Analog Input Object 14 Voltage: Phase A-Phase B Volts_AB Volts
Analog Input Object 15 Voltage: Phase B-Phase C Volts_BC Volts
Analog Input Object 16 Voltage: Phase A-Phase C Volts_AC Volts
Analog Input Object 17 Voltage: Phase A-Neutral Volts_AN Volts
Analog Input Object 18 Voltage: Phase B-Neutral Volts_BN Volts
Analog Input Object 19 Voltage: Phase C-Neutral Volts_CN Volts
Analog Input Object 20 Current: Phase A Current_A Amps
Analog Input Object 21 Current: Phase B Current_A Amps
Analog Input Object 22 Current: Phase C Current_A Amps
Clear the kWh accumulator to zero by writing 0.0 to the PRESENT_VALUE property Analog Value Object 1.
Changing the Device_Instance:
• Units are shipped with a default Device Instance of 123.
• There are 2 methods of changing the Device_Instance:
1. Write the Object_Identifier directly. The Device’s Object_Identifier contains both the Object_Type (Device = 8) and the Object_Instance (0-4194302). Write
the Device’s Object_Identifier with (8,Instance) to change the Device_Instance.
2. Use Analog Value Object 2. Although a REAL (i.e. floating point) value, writing the Present_Value of AV2 is an alternative method of changing the Device_
Instance. This value may be written in the range 0-4194302. Any fractional value will be truncated (e.g. 57.234 will be written as 57).