Veris Technologies OpticMapper - Operating Instructions User Manual
Page 49
Pub.# OM17-OpticMapper
6-15
7. At this point, upon clicking ok, legible strings of GPS data should begin appearing on the
laptop screen. Here’s an example of a typical set of strings:
$GPGGA,191528.00,3851.0333,N,09737.2342,W,2,08,1.3,372.7,M,27.3,M,10.0,0100*69
$GPRMC,191528.00,A,3851.0333,N,09737.2342,W,0.1,0.0,090998,6.3,E*48
8.
If GPS data doesn’t appear, recheck the port and configuration settings to make sure they
are correct. If the data won’t appear correctly in HyperTerminal, consult your GPS supplier
to see what adjustments (connectors or software) are necessary to bring the signal into a
computer.
9. If the signal appears correctly on HyperTerminal and it shows that the required strings are
being output, highlight a page of strings, copy and paste into Word or Wordpad before
exiting HyperTerminal.
10.
Retry the unit with the Veris instrument. If it still doesn’t work, please email the page of GPS
strings from HyperTerminal to
, along with your contact information.