TROY Group MICR_IRD 3015 Security Printing Solutions User’s Guide - Manual (Page 78)

Section 4 Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- 50- 70540-001 Rev. A
4-33
Identifying Print
Defects Continuous streaks and voids that
may appear on the TROY MICR
Quality Document are usually the
result of a low toner condition. A
scratch or other contamination on
the surface of the optical drum
inside the toner cartridge can also
cause streaking and other print
quality defects.
To ensure optimum MICR print
quality, always use a genuine
TROY MICR toner cartridge with
your TROY Security Printing
Solution. Always replace the
TROY MICR toner cartridge with a
new TROY MICR toner cartridge
when the
TONER LOW message
appears on the printer control panel.
MICR documents printed after a
low toner condition may not meet
MICR specifications and cause
your printed checks to be rejected,
thereby incurring significant
manual processing fees to you by
your bank.
NOTE: If your TROY Security
Printing Solution develops a
noticeable print quality defect that
cannot be corrected by replacing
the MICR toner cartridge, the MICR
Quality Document can be sent to
TROY for evaluation. Do not
continue to print MICR documents if
print defects are present.