TROY Group Hewlett-Packard LaserJet 9000 Font DIMM Kit Installation Guide - Manual (Page 8)

DIMM Installation Guide
Hewlett-Packard 2100 / 2200 Printers:
IMPORTANT: Ensure the printer power is switched OFF, and then disconnect the printer power cord
from the AC wall outlet.
1. Depress the two buttons located at the rear of the printer, and pull the cover open (Figures 1 and 2).
Figure 1
. Unhinge the cover, and remove the cover from the printer (Figure 3).
Figure 2
2
Figure 3
Document #50-70395-001 Rev. D
Page 8 of 22