EVS IPDirector Version 4.3 - October 2007 Part 2 User's Manual - Manual (Page 40)

IP Director Version 4.3 – User Manual – Part 2: Logging and Browsing
EVS Broadcast Equipment
Issue 4.3.C
27
1.6.9 H
OW TO
V
IEW A
E
VENT ON A
L
OG
To view a log entry of a log sheet (i.e. load the log on the player
channel at the relevant timecode position), proceed in one of the
following ways:
• Double-click a log entry from the log.
• Right-clicking the log entry and select View from the
contextual menu.
The player channel will go to the timecode of the log entry on the
record channel defined as the preview channel for the log sheet.
1.6.10 H
OW TO
R
ECALL AN
A
SSOCIATED
C
LIP
If an associated clip is selected from the drop-down list that
appears when the Associated Clip field is selected on a log
entry, this clip will appear on the assigned output regardless of
its record source. The player area will display the timecode
within the clip that has been recalled.
Note
If a monitoring output of the channel selected is
connected to the video card of the workstation then by
opening the Video display panel it can be seen on the
VGA. If control of the channel is required there must be
an RS-422 connection to the XT machine the channel is
part of.
A clip or group of clips can be selected from the drop-down list
and added to a bin in Database Explorer or to clip-list on a
Control Panel for later use by using a drag and drop command.
The Send to Archive function can be selected from the
contextual menu opened with a right-click. For more information
on archiving, refer to the “Archive Clips” section in the Database
Explorer chapter.