Ip logger, 1 introduction, 2 creating a log sheet with ip logger – EVS IPDirector Version 4.3 - October 2007 Part 2 User's Manual User Manual

Page 14: Introduction, Creating a log sheet with ip logger

IP Director Version 4.3 – User Manual – Part 2: Logging and Browsing

EVS Broadcast Equipment

Issue 4.3.C

1. IP Logger

1.1 INTRODUCTION

IP Logger can be used to create a log which relates events with
timecodes, camera angles, clip numbers and metadata in a fast

and efficient way. In this way, IP Logger does not interfere with,
but compliments a live production, while also producing
invaluable data for use of the material during or after the event.

Once the live event is over, the log can be refined as necessary
because IP Logger can be used to add events to a log at any

time on any recorded media declared relevant. It will associate
any clips then found on the XNet network with the log.

Also a previously recorded feed can be reviewed and a log post
produced, as the clip association data is always updated
whenever a new event is recorded in an active log

1.2 CREATING A LOG SHEET WITH IP

LOGGER

When creating a new empty log sheet for an event, the user first
needs to define the parameters of the log.

To do this, they follow a 4-step procedure using the Create a
New Log Sheet wizard. The procedure consists of the following
steps:
• Defining the log sheet characteristics
• Defining the log sheet keywords
• Defining the relevant recorders
• Defining the user’s fields

To start the New Log Sheet wizard, click the File > New Log
Sheet menu: