EVS IPDirector Version 4.3 - October 2007 Part 2 User's Manual - Manual (Page 122)

IP Director Version 4.3 – User Manual – Part 2: Logging and Browsing
EVS Broadcast Equipment
Issue 4.3.C
109
3.6.8 H
OW TO
M
AKE
A
UTOMATIC
C
LIPS
B
ASED ON A
L
OGGED
E
VENT
To automatically make a clip based on a log entry on the record
train selected as the preview recorder, proceed as follows:
1. Click on the event on the log sheet in the Database
Explorer.
2. Drag the log entry onto a bin in the Database Explorer tree
or onto an open BIN window.
A clip or series of clips are automatically created with IN points
and OUT points determined by the values specified in the Clip
Creation Settings tab of the Tools > Settings menu. For more
information on this setting, refer to the description of the Tools
menu in the section on IP Director main window.
Note
It is possible to create a clip on all relevant recorders
in one single drag & drop operation simply by holding
the SHIFT key on the keyboard.
Note
If the CTRL key is hold during the drag & drop
operation, the ‘Save Clip’ window is opened. It is then
possible to name the clip and associate some metadata.