EVS IPDirector Version 6.2 - June 2013 IPLOGGER User Manual - Manual (Page 71)

14. IPLogger Settings
You can define the settings for IPLogger from the IPDirector main window via Tools >
Settings > IPLogger.
Option Description
Apply a TC
offset at log
creation on a
live feed To compensate for a delay in the logging relative to the image
being viewed, you can enter a timecode delay in milliseconds.
If you are for example logging a sports event in London, while the
event is being recorded in China, there could be a small delay
between the clip and the timecode in your logsheet.
The TC delay may also be used to compensate for the reaction
time of the logger, i.e. the delay between the instant the action
happens and when the logger clicks the New button.
The offset value must be included in the range "0 – 3 600 000"
msec.
Protect Media
Prefix Determines the prefix to be added to the clip name when clips are
created using the Protect Media feature.
Warning
Messages Determines whether or not warning messages will appear when
the following actions are performed:
• adding a protect media to a logsheet
• deactivating a logsheet
Action of
ENTER and
CTL+ENTER
shortcuts Determines the behavior of the ENTER shortcut and the
CTRL+ENTER shortcuts.
When the checkbox is selected:
• ENTER validates the log
• CTRL+ENTER goes to the next line in the Description field.
When the option is not selected, the behavior of the the two
shortcuts is reversed.
Another setting exists under Tools > Settings > Clips > General for the automatic
creation of clips based on logs. Refer to
the General Functions user manual .
IPDirector - Version 6.2 - User Manual - IPLogger
14. IPLogger Settings 61