beautypg.com

How to apply a timecode offset at log creation, Applying a timecode offset at automatic log export – EVS IPDirector Version 6.2 - June 2013 IPLOGGER User Manual User Manual

Page 61

background image

9.5.

How to Apply a Timecode Offset at
Log Creation

If the operators are slow or they are logging on a delayed feed, they can decide to apply an
offset at log entry. The offset is applied to the timecode when the user creates the log. To
do so, proceed as follows:

1. Select Tools > Settings > IPLogger.

2. In the Apply a TC offset at log creation on a live feed field, enter a value in msec

for the offset.

3. Click OK.

Each time you will create a new log, the offset will automatically be applied to the log
timecode:

Log timecode = timecode when you have clicked the New button – offset value

9.6.

Applying a Timecode Offset at
Automatic Log Export

When defining a directory for automatic log export in the Remote Installer, an offset can
be specified. This could be, for example that the two setups are in different time zones.
Refer to the Technical Reference manual for more information.

IPDirector - Version 6.2 - User Manual - IPLogger

9. Entering a Timecode Offset

51