EVS IPDirector Version 6.2 - June 2013 IPLOGGER User Manual - Manual (Page 40)

• the workstation channel, this means the player channel set as linked from the
IPDirector Configuration window of the Remote Installer
• the Software Player, if the workstation has a valid license for the OCX Software
Player, and if the Software Player is currently associated to a Control panel or a
Playlist panel.
To associate a player channel to the application, proceed as follows:
1. Right-click the Associated Channel zone at the bottom of the window.
A contextual menu is displayed.
2. Select a player channel from the menu:
The player channel name is displayed in the Associated Channel zone.
If the selected player channel is connected to an IN port of a video router, itself associated
to OUT ports, the name of the router OUT port(s) is displayed after the player channel
name.
Additionally, the Player area of the IPLogger window becomes active and shows the
running timecode of the record train loaded on the associated player channel.
4.3.3. How to Log a Recorded Clip or Train
Prerequisites
1. Assign a player channel or the Software Player to a Control Panel
2. Assign the same player to the IPLogger window
3. Load the selected record train or recorded clip on the player
30 4. Adding Logs to Media
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A