AASTRA Office 70IP-b User manual - Manual (Page 47)

Personalizing Your Phone
47
Protect against Intrusion/Announcements
You want to protect against intrusion or announcements.
You can use the configuration mode to define that call waiting or announcement are not enabled on your
terminal.
Setting the Ringing Properties
This section explains how to set your phone's ringing tone properties.
Setting the Ringing Volume on your Phone during Ringing
You want to adjust the ringing volume.
You can adjust the ringing volume while the phone is ringing.
Setting the Ringing Properties on the Phone
You want to change the way in which your phone rings.
You can set the ringing volume, ringing speed, and ringing melody.
Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display reads "Intrusion" or
"Announcement".
Press the "Call waiting" or "Announcement" Foxkey.
Use the navigation key to switch between "Allow" and "Protect Against".
OK Press the "OK" Foxkey.
The setting is stored.
Quieter: Press the –-key.
Louder: Press the +-key.
Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display reads "Ring".
Ring Press the "Ring" Foxkey.
The display reads "Ringing volume".
Use the navigation key to set the ringing volume.
OK Press the "OK" Foxkey.
The display reads "Ringing melody".
MENU
MENU
MENU
MENU