beautypg.com

3 searching within pp list – AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN User Manual

Page 57

background image

Installation, Administration and Maintenance

Aastra

depl-0900/0.4

Page: 57 (104)

• The OMM will allow a subscription of configured but not subscribed

PPs’ during the next hour only. The administrator must press the
Subscribe button again to permit more PP handsets to subscribe to
the SIP-DECT system.

3.3.4.2.2 Wildcard

Subscription

To minimise administration effort, subscription is also possible, if the IPEI is
not configured. But because of the loss of further security by IPEI check, this
kind of subscription is only allowed within a short default time interval of 2
minutes.

To enable subscriptions, please press the “Start” button of section “Wildcard
Subscription” and increase the time interval if necessary (or refresh
subscription permission in time):

• The OMM will allow a wildcard subscription during the set time

interval. In case of timeout the permission is lost. Only subscription
with IPEI remains allowed within the fixed limit of one hour (see
chapter before).

To achieve a selection of data during subscription (e.g. the user name being
assigned to the PP), the field “additional ID” can be set in OMM data. If the
OMM receives a valid “additional ID” during subscription, the referring data
are assigned to the PP.

If the additional ID is requested for a data record the PP user has to type it.
“Additional ID” can be set within the authentication code menu. Please type
the R-Key and type the additional ID.

WARNING: The input of the additional ID is only possible with Aastra DECT
142 / Aastra 142d. There is no possibility, to type that value on third party
GAP phones. If GAP phones are going to subscribe wildcard, the first free PP
data record without any additional ID will be selected and assigned.

3.3.4.3 Searching within PP list

Searching for Portable Parts in the SIP-DECT system

If the user wants to find a certain handset then the search function can be
used. A click on the “Search” button provides the following pop-up window.