1 booter update, 2 selecting the right dhcp server – AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN User Manual
Page 24

Installation, Administration and Maintenance
Aastra
depl-0900/0.4
Page: 24 (104)
Tones for the following countries are supported:
country
code
country
1
Germany
2
Great Britain
3
Suisse
4
Spain
6
Italy
7
Russia
8
Belgium
9
Netherlands
10
Czech
11
Austria
12
Denmark
13
Slovakia
14
Finland
15
Hungary
16
Poland
17
Belarus
18
Estonia
19
Latvia
20
Lithuania
21
Ukraine
22
Norway
24
Sweden
25
Taiwan
100
North
America
101
France
102
Australia
3.1.4.1 Booter
update
Each application SW comes with the latest released booter SW. The
application SW will update the booter automatically.
WARNING: After an upgrade from a 1.1.x to 1.7.x OpenMobility Release the
Booter of the RFPs will be updated to Version 3.3.x. The OpenMobility
Configurator 1.7.x is required to configure RFPs with this new Booter version.
If you downgrade the RFP to an older Release the Booter will not downgrade
automatically.
3.1.4.2 Selecting the right DHCP server
The DHCP client requests its own IP address using code 50. The DHCP
client will select the DHCP server that offers the currently used IP address.
Additionally the mandatory options must be offered otherwise the DHCP offer
is ignored by the DHCP client.
If no matching reply was received the DHCP client resends the request 2
times after 1 second. Then the DHCP client will wait for 1 minute before
resending 3 requests again.
If the DHCP client cannot accept an DHCP offer within 3 minutes the RFP is
rebooted.