AASTRA AMC+ User guide for Android EN - Manual (Page 30)

AMC+ 2.0 User Guide 10 Settings
10.3 VoIP Settings
The IP address is the IP address or host name of your AMCC (or the first network device in between
AMC+ and AMCC). The default port is 5062. The Username is the username that has been registered
on the AMCC. Usually it is your corporate phonenumber (to make it unique in the system). The
Password
is the one that belongs to your user name in the AMCC.
Transport Protocol
The transport protocol should be TCP only! The reasons are system performance and bat-
tery time.
10.4 Network Settings
The following settings manage the use of Packet Data for all services offered by the AMC+.
10.4.1 Network Preferences
Unlike Wi-Fi connections, cellular connections cannot carry data. Availability of data channels depends
on your provider and on your contract. Many contracts come with a certain amount of data traffic
included Packet Data.
The Packet Data settings described here allow you to determine if and how the AMC+ is allowed to use
cellular Packet Data. You can choose to generally disable it for the AMC+ (Off ), use it exclusively for
HTTP(S) requests (Minimal, i.e. Corporate Contacts access, HTTPS Callbacks etc.), or allow its usage
only in your provider’s network (Local Network). To use it whenever needed for a system registration
(no Voice over 3G) set this to GPRS Dynamic.
Native Settings Dependent
Smartphones have preference options to enable or disable the use of packet data. If turned
off in the native menu, any preferences made within the AMC+ remain without effect!
Costs and Battery Life
Please note that the usage of data channels may drain the phone’s battery. If costs run too
high, a provider might also disconnect the call. Section "Packet Data"
10.4 on page 30
contains information about the amount of data consumed by certain features.
10.4.2 VoIP over 3G
Check the box behind the setting VoIP over 3G to enable VoIP calls over Packet Data. Please note that
the information given above - about battery life etc. - also apply to this setting.
30