Call types, Direct call (mobile call without passing the pbx), Callback – AASTRA AMC+ User guide for Android EN User Manual
Page 19
AMC+ 2.0 User Guide
8 Features of the AMC+
8.5 Call Types
There are several call types that you can select before dialing. They give you manual access to the
potentially cost saving features of the AMC+. Please see the picture below.
Note:
Which of the following call types are available depends on the configuration done by your ad-
ministrator.
Open the Call Type View
Enter a number to dial and select the phone button. Hold
the phone button for call-type options or open the main
menu to open the Call Type Pre-Selection. Call Types
may also be used automatically by the AMC+ if routing
rules have been specified by your system administrator.
Refer to Automatic described below and follow the ref-
erences there to find out more about automatic routing.
8.5.1 Direct Call (Mobile call without passing
the PBX)
This option gives you the possibility to place a call "di-
rectly" through the mobile network. Such a call will then
not be routed through your enterprise network, and your
Entprise number will not be sent as your caller ID.
Figure 4: Open the main menu and select Call
Type Pre-Selection
.
8.5.2 Callback
Demand a Callback
and let yourself be connected with the called party. No call will be established
from your smartphone. This may have a favorable effect on costs. On Android an incoming Callback
has to be answered by the user, it can not be answered in the background by the AMC+.
General setup and functionality of Callback is described in
. To use the HTTPS Callback,
the HTTPS Port must be set (refer to
1
An incoming callback is accpeted automatically if the AMC+ is running on Android 2.2 or below. On later OS versions,
the incoming call has to be accpeted manually.
19