AASTRA AMC+ User guide for Android EN - Manual (Page 28)

AMC+ 2.0 User Guide 10 Settings
10.1.3 IMS WLAN to Cellular
If there is an ongoing VoIP call while you are leaving an area that is covered by a Wi-Fi hotspot, you
may want to switch from Wi-Fi (or WLAN) to the your cellular network.
How it works
The number configured here is used by the AMC+ to communicate to the AMCC that a manual han-
dover from Wi-Fi to your cellular network is desired. It has to correspond to the number configured for
this purpose on the AMCC. The call will then be established via this number.
10.1.4 Voice Mail Number
If your Voice Mail is configured here, you have the possibility to access your corporate voice mail
messages via the AMC+.
10.1.5 Feature Access Number
Note: This setting is only needed if Operator Supported Dialing (OSD) is used! Refer to 10.6.6 .
Enter a number here that makes your PBX route a call to the AMCC. This number will then be dialed
to ensure the functionality of out-call features such as Call Forwarding in conjunction with OSD.
10.1.6 Fast Forwarding Number
Configure the phone number for the phone you want to have as Fast Forwarding destination In most
cases this will be your desk-phone number, but it can be any number. The AMC+ will offer the option
Fast Forwarding
in the in-call features menu. This option can be used to transfer an active call instantly
to the pre-configured number.
10.1.7 Exception Numbers
Specify numbers that must be dialed directly in all cases. The main purpose is to make sure that special
numbers such as operator voice mail and the like are not considered for any special routing via the
AMC+.
To specify more than one number, separate them with dashes "-" (no white spaces).
Note: Emergency numbers do not have to be specified here, as they are treated separately. The major
emergency numbers for all continents such as 112 and 911 are preloaded in the AMC+. If you have
any special or regional numbers however, you can configure them here.
28